Alternative Energy Wind Turbine Complete System With 48V 96V 100Ah
200Ah IP54 Protection
If your system is on the grid, we still recommend designing because
you're guessing or trusting the salesperson's estimate of
performance, which is the key to calculating your payback period,
and again, you're just guessing. A small underestimation or
overestimation far exceeds the design cost. An undersized battery
pack or inverter will significantly shorten the life of the battery
system, leaving you with frequent power outages and damage to
system components, leading to rapid degradation, while an oversized
system will cost you more and be more efficient. Low.
Depending on who you ask, you're more likely to receive a response
based on expected sales from one or another professional firm.
Australian wind and solar companies have expertise in both. Our
system designs clearly state which system is best for your
application. It's not uncommon for a customer to think there's
enough wind in their home to generate electricity, and our reports
have proven otherwise. This saves the customer thousands of dollars
to spend on other resources (such as solar power, generators,
etc.).
Furthermore, it can be assumed that wind is not a viable resource,
and our report can demonstrate that it is extremely viable. The
same can happen with solar cells. For the question of wind or
solar, our simple answer is both. We always recommend running a
report identifying the two available resources; there is nothing to
lose and nothing to gain by doing so. Guiding customers in only one
direction without a system design is a gamble against you.
| Technical Parameter |
| NO. | Item | Parameters |
| 1.Performance | Type | LiFePO4 Battery |
| Nominal Voltage | 51.2V |
| Rated Capacity | 200Ah |
| Operating Voltage Range | 42V-57.0V(Typical:51.2V) |
| Charging Voltage | 57.0V |
| Discharge cut-off voltage | 42V |
| Charging Current(Max.) | 60A |
| Discharge Current(Max.) | 100A |
| Width | 435mm |
| Height | 875mm |
| Depth | 190mm |
| Weight | 102kg |
| 2.Function | Installation Method | Wall-mounted |
| Communication | RS485 |
| Terminal stud | M8 Bolt |
| Alarm&protection | Over voltage,under voltage,short circuit,over current,over
temperature,low temperature protection,etc. |
| 3.Working Condition | Cooling Mode | Automatic cold and hot |
| Altitude | ≤4000m |
| Humidity | 15%-85% |
| Operating Temperature | Charge 0℃-45℃ Discharge -10℃-60℃ |
| Recommended charge temperature | 15℃-40℃ |
| Recommended discharge temperature | 15℃-40℃ |
| Recommended storage temperature | 0℃-35℃ |
Description of Product
1. What is wind&solar hybrid system?
Overview. The term wind hybrid system describes any combination of
wind energy with one or more additional sources of electricity
generation (e.g. biomass, solar or a generator using fossil fuels).
Hybrid system are very often used for stand-alone applications at
remote sites.
2. What is the best off-grid power supply?
Here are five cutting-edge real-world off-grid power sources.
A. Solar roof tiles.
B. Residential wind turbines
C. Geothermal heat pump
D. Micro hydro
E. Solar/wind hybrid system
F. Off-grid power system
3. Are residential wind turbines worth it?
Small wind turbines are a cost-effective way to generate
electricity for your home. However, many homes are not suitable for
installing wind turbines for several reasons. First, in order to
generate enough power to make the upfront investment worthwhile,
wind turbines need to be located in windy locations.
4. What is an off-grid system?
Off-grid systems work independently of the grid, but have batteries
to store the solar energy generated by the system. The system
usually consists of solar panels, batteries, charge controller,
grid box, inverter, mounting structure and system balance.
